Connecting to a Zeevee
After the Zeevee has been plugged in, the front panel should display the current IP address. (Sometimes there is a back panel that will display the IP address) If the screen is in standby mode, the Zeevee logo will appear. Simply press the control wheel located next to the display and the IP address should appear. Connect to the Zeevee via ethernet cable, and in a web browser enter the shown IP address.
Make sure your computer is set to DHCP in your IPv4 setting and not a static IP address or you will not be able to connect.
Once you have connected you will be prompted for a username and password. The default username and password are:
- Username: admin
- Password: admin
Configuring Channel Numbers
When changes need to be made to the channels that are being broadcast, navigate to the “RF Channel Plan” tab located at the top of the page. From here you can configure the channels that the TV will see in two different ways. Channels can be set as both a dotted number (ex. 5.1, 5.2 ,6.1 ,6.2) or a dotless channel (ex. 2, 3, 4, 5).
When configuring the channels as a dotted number, simply enter the channel as you want them to appear (ex. 2.1 ,3.1 ,4.1). However, if you want to use dotless channels, add “#” before the channel number. (ex. #2, #3 ,#4)